|
|
 |
|
|
|
|
This
Sony integral dome enclosure makes the easy-to-install SNC-DF40N
an unobtrusive addition to any environment. M-JPEG and MPEG-4
compression with Adaptive Rate Control ensures stable, high
quality pictures with network-efficient bandwidth requirements,
delivering high frame rates up to 30 fps at QVGA resolution
via the 1/4 type IT Super HAD CCD sensor.
The
camera supports audio transmission from either its own in-built
microphone or an external line input, and the in-built vari-focal
lens provides optimum coverage over any desired area. Smart
vector motion detection provides more efficient activity
detection with reduced risk of false triggers.
|
|
 |
-
Built-in Web Server - View and control using standard
web browsers
- High
resolution - ¼" type Super HAD CCD
-
High sensitivity - 0.8 lux (AGC on, F1.0, 50 IRE)
- Includes
2.7 x vari-focal lens, with CS mount
- Analog
video output - 480 TV lines
- Bi-directional
audio transmission, with external microphone input
- Motion
detection using motion vector
- Equipped
with one sensor in and two relay outputs
- Back
light compensation, ATW and AGC
- MPEG-4
and JPEG Compression Formats, selectable
-
High frame rate: 30fps(QVGA), 15 fps(VGA)
- Up
to 10 users (MPEG-4 mode); 15 users (JPEG mode)
- 100Base-TX/10BASE-T
- Supports
TCP/IP, UDP, RTP, RTCP, ARP, ICMP, DHCP, DNS, HTTP,
FTP, SMTP, NTP and SNMP (MIB2)
|
|
Motion
Detection/Alarm Trigger
The SNC-DF40P is equipped with a built-in motion detection
function that can generate an alarm through its alarm-output
port or trigger another device to perform a variety
of actions. The motion detection function uses vector
information to detect motion so that unwanted noise
components do not accidentally trigger the alarm. In
addition, the SNC-DF Series is equipped with a sensor-input
port that can receive a trigger from an external sensor.
Pre-/Post-Alarm
Image Storage
With a built-in buffer memory, the SNC-DF Series can
store several seconds of pre-alarm and post-alarm
still images when the motion detection function, the
alarm input or both trigger an alarm.
Image
Transfer Using FTP/SMTP
All of the pre-/post-alarm images stored at the time
of an alarm event can be transferred to an FTP server
for later viewing. In addition, the still image captured
at the time of an alarm event can be sent to a designated
e-mail address.
Analogue
Composite Video Output
The SNC-DF Series is equipped with an analogue composite
video output, allowing camera images to be directly
recorded or monitored by connecting video equipment
such as time-lapse recorders, hard disk recorders,
and monitors.
Single
Cable operation for easy installation
The SNC-DF40P offers a choice of three different power
supplies. AC 24 V or DC 12 V can be supplied through
the standard power terminal while Power-over-Ethernet
simplifies installation by reducing the need for additional
cables for power.
|
|
|
Imager
1/4 type Sony Super HAD ™ CCD
Lens 2.7 x vari-focal lens, CS mount
Minimum Illumination 0.8 lux (AGC on, F1.0, 50 IRE)
White Balance ATW
Electrical Shutter 1/60 to 1/100,000 sec. (CCD IRIS)®
Exposure Control DC servo auto iris lens and CCD IRIS,
Backlight compensation
Image Data
MPEG-4 and JPEG Modes 640 x 480 (VGA), 480 x 360,
384 x 288, 320 x 240 (QVGA), 256 x 192, 160 x 120
(QQVGA)
Compression Format MPEG-4, JPEG (Selectable)
Maximum Frame Rate MPEG-4 mode: 640 x 480: 15fps;
320 x 240: 30fps
JPEG mode: 640 x 480: 18fps; 320 x 240: 30fps
Audio
Compression Format G.711 (64KBps)/G.726(40,32,24,16KBps)
Network
Protocols TCP/IP, UDP, RTP, RTCP, ARP, ICMP, DHCP,
DNS, HTTP, FTP, SMTP, NTP and SNMP (MIB2)
Number of Users MPEG-4 mode: 10 maximum
JPEG mode: 20 maximum
Ethernet 100Base-TX/10Base-T (RJ-45)
Mass Approx.
1,500 g (3 lb 5 oz)
Dimensions 165 x 135 x 166 mm (6 1/2 x 5 3/8 x 6 5/8
inches)
Power requirements AC 24 V 50/60 Hz, DC 12 V,POE
Power consumption 8.0 W
Operating temperature -10 to +50 ºC (14 to 122
ºF)
Storage temperature -20 to +60 ºC (-4 to +140
ºF)
Operating humidity 20 to 80%, non-condensing
Storage humidity 20 to 95%, non-condensing
|
|
|
|
|
