Sony SNCRZ30N/2 IP Network Camera
From Kintronics

More Sony Cameras | More Camera Systems | IP Software | Network Attached Camera systems |
Network Attached Video Storage | Contact us

SNC-RZ30N PTZ Camera


Combining network functionality with Pan/Tilt/Zoom capability, the SNC-RZ30N/2 camera takes remote monitoring and general IT applications to the next step by offering the flexibility to see almost anything within the camera's range and field-of-view over an ordinary TCP/IP network. By simply using a popular web browser like Microsoft™ Internet Explorer, images and the PTZ movement of the SNC-RZ30N/2 camera can be controlled using a PC at any location and at any time without the need for any additional software or plug-ins.

The SNC-RZ30/2 employs a new 1/6 type Interline Transfer Super HAD CCD, which will provides higher sensitivity. Transfer Super HAD CCD, which will provide a higher sensitivity image of 2.5lx The SNC-RZ30/2 has the slow shutter on/off button on the setting menu of the web page, which allows you an easier shutter setting modification.

The versatile and flexible SNC-RZ30N/2 is packed with incredible features and comes in a sleek, compact and lightweight design that can be ceiling mounted or placed on a flat surface. If the SNC-RZ30N/2 camera is installed on a desktop, captured still images and composite video output images will be inverted.

  • Built-in Web Server - To be used with standard web browser
  • 25x AF Zoom
  • High speed, quiet pan/tilt/zoom
  • Up to 50 User Access
  • 10/100 Base T Ethernet Interface
  • 736 x 480 Pixels Maximum/ up to 30 fps
  • Supports DHCP, FTP, SNMP, and VISCA RS-232C/485 protocols
  • Rapidly recenter and zoom image automatically
  • Ceiling or Wall Mount options*
  • Motion Detector with Relay Output
  • Two Type II PCMCIA Slots
  • Compatible with CISCO's Aironet® 350 Series of IEEE 802.11b compliant wireless PC cards - NEW!
  • Pocket PC PDA compatible - NEW!
  • Steadyshot® Function
  • Day/Night View Mode
  • * If the SNC-RZ30N/2 camera is installed on a desktop, captured still images and composite video output images will be inverted.
  • The SNC-RZ30/2 employs a new 1/6 type Interline-Transfer Super HAD CCD, which will provide a higher sensitivity image of 2.5lx
  • The SNC-RZ30/2 has the slow shutter on/off button on the setting menu of the web page, which allows you an easier shutter setting modification.
  • Minimum Object Distance is (Tele) 800mm,(Wide) 300mm

Feature

Benefit
  • 25x Optical Zoom Capability

Allows a user to zoom in on small or distant objects with exceptional clarity.

  • Slow Shutter Setting

While the original model requires CGI command input, SNC-RZ30/2 has the slow shutter on/off button on the setting menu of the web page, which allows you an easier shutter setting modification.

  • High-resolution CCD sensor

The SNC-RZ30/2 employs a new 1/6 type Interline-Transfer Super HAD CCD, which will provide a higher sensitivity image of 2.5lx while the original version provided 3.0lx at F1.6.

  • Built-in PCMCIA card slots to expand memory or go wireless! - NEW

As wireless networks become more commonly used, you can now install the SNC-RZ30N/2 camera without unsightly wires. The SNC-RZ30N/2's two Type II PCMCIA card slots are now compatible with CISCO's Aironet® 350 series of IEEE 802.11b compliant wireless PC cards or you can further expands the camera's memory with a flash ATA card or ATA HDD card, allowing for tens of thousands of images to be stored.

  • Pocket PC PDA Compatible - NEW!

The SNC-RZ30N/2 can now also be accessed and controlled via Hewlett-Packard/COMPAC's iPAQ™ H3995/H3975 handheld PC PDAs and Toshiba's Genio® e550 GX handheld PC PDA.

  • Click'n PTZ Function - NEW!

Adding to its already powerful P/T/Z functions is the SNC-RZ30N/2's ability to now rapidly recenter the selected area of a larger image with just the click of a mouse. Thanks to its newly incorporated Click'n PTZ function, all you need to do is click, drag and release to quickly zoom in on a particular area. In addition, the newly zoomed image automatically recenters itself within the display.

  • Improved Touring Function - NEW!

The SNC-RZ30N/2 allows touring to resume after interruption. Normal tour is interrupted when the user starts to remotely control the camera. The SNC-RZ30N/2's improved touring function now automatically resumes to tour after the user-defined period of inactivity.

  • Analog composite video output connector

Unlike most network cameras, the SNC-RZ30N/2 has an analog composite video output connector for outputting video to a local recorder, making it ideal for reviewing activity that might have been missed while monitoring in real time.

  • High quality image/ selectable parameters

The SNC-RZ30N/2 has a number of selectable parameters that make it easy to match the quality of the image with your bandwidths. The resolution can be selected from a choice of 736 x 480, 640 x 480, 320 x 240, and 160 x 120. You can set the parameters so that images are still very clear with no image break up.

  • Minimum object distance

(Tele) 800mm,(Wide) 300mm

  • Image transfer using FTP/SMTP

Because the SNC-RZ30N/2 supports both FTP and SMTP protocols, JPEG still image data can be transferred, as required, either to an FTP server or a specified e:mail address as a JPEG attachment.

  • Activity Detection/Alarm Trigger

The SNC-RZ30N/2 has a built-in motion and light sensor that can trigger an alarm or a switch. In addition to using these built-in sensors, a system can be configured such that up to three external sensors can be connected to the SNC-RZ30N/2 for use as an activity detector.

  • Analog Composite Video Output

The SNC-RZ30N/2 can output an analog composite video signal via a BNC connector on the camera's rear panel. This is an ideal feature for sending signals to a local recording device or monitor.

  • VISCA ™ RS-232C/485 Protocol

The SNC-RZ30N/2 can now be interfaced with external control equipment using the VISCA protocol. This configuration allows for local control of the P/T/Z and camera settings.

  • Simultaneous Access

Up to 50 users can simultaneously access a single SNC-RZ30N camera to monitor images and control the unit. One of two control modes for the camera can be set up the administrator, allowing control of the camera to be shared by a number of users.

  • Network Security - IP Filtering

User access to the SNC-RZ30N/2 can be limited by IP filtering. Up to 10 different groups can be established by defining an IP address range for each group. This allows users with IP addresses in a defined range to access the camera while denying access to all other addresses.

  • Network Security - Password Protection
 Users names and passwords can be assigned to allow four levels of access. Generally, the administrator has complete access/control of the camera, while the other level levels can be set to limit user privileges to functions such as PTZ control, viewing trigger control, etc.

 
Specification Detail
  • Camera Imag
 The SNC-RZ30/2 employs a new 1/6 type Interline-Transfer Super HAD CCD, which will provide a higher sensitivity image of 2.5lx
  • Pixe
 680,000 pixels
  • Electronic shutter
 1/4 to 1/100,000 sec SNC-RZ30/2 has the slow shutter on/off button on the setting menu of the web page, which allows you an easier shutter setting modification.
  • Exposure
 Auto [full auto including backlight compensation, Shutter-priority, Iris-priority] and manual
  • White Balanc
 Auto, ATW, Indoor, Outdoor, One-push (trigger command), Manual
  • EV Compensation
 -1.75 to +1.75 (15 steps)
  • IRIS
 Auto/Manual (F1.6 to close)
  • Gain
 Auto/Manual (-3 dB to 28dB)
  • Focus mode
 Auto/Manual (Near, Far, One-push autofocus)
  • Lens - Zoom ratio
 25x optical zoom, 300x with digital zoom
  • Horizontal viewing angle
 2.0 degrees to 45 degrees
  • Focal length
 f = 2.4 mm to 60 mm
  • F-number
 F1.6 (wide), F2.7 (tele)
  • Minimum object distance
 Tele: 800 mm Wide: 300 mm
  • Hardware - CPU
 32-bit RISC processor
  • Hardware - RAM
 32 MB (includes 8 MB alarm buffer)
  • Hardware - Embedded flash memory
 8 MB
  • Pan/Tilt - Pan angle
 -170 to +170 degrees
  • Pan/Tilt - Pan speed
 2 sec. / 340 degrees
  • Pan/Tilt - Tilt angle
 -25 to +90 degrees
  • Pan/Tilt - Tilt speed
 1.5 sec. / 115 degrees
  • Image Data - Resolution
 736 x 480, 640 x 480, 320 x 240 and 160 x 120
  • Image Data - Compression
 Motion JPEG
  • Image Data - Compression Ratio
 1/5 ~ 1/60 (10 steps)
  • Image Data - Frame Rate
 30 fps max. (640 x 480)
  • Interfaces - Ethernet
 100Base-TX/10 Base-T (RJ-45)
  • Interfaces - PCMCIA
 Type II x 2
  • Interfaces - Video Output
 Analog Composite (BNC x1)
  • Interfaces - Sensor In
 3
  • Interfaces - Alarm Out
 3
  • Serial IF
 RS-232C/485 (transparency only)
  • Analog Video Output - Signal System
 NTSC
  • Analog Video Output - Sync. System
 Internal
  • Analog Video Output - Horizontal Resolution
 480 TV Lines
  • Analog Video Output - S/N Ratio
 Better than 48dB
  • Analog Video Output - Min. Illumination
 3 lx. (color)
  • Mass
 2 lb. - 10 oz.
  • Power requirements
 DC 12 V via AC Adaptor (100 to 240 V)
  • Power Consumption
 21.6 W
  • Operation Temperature
 0°C to +40°C (32°F to 104°F)
  • Storage Temperature
 -20°C to +60°C (-4°F to 104°F)
  • Operating Humidity
 20% to 80% Non-condensing
  • Storage Humidity
 20% to 95% Non-condensing
  • Dimensions (W x H x D)
 140 x 175 x 144 mm (5-5/8 x 7 x 5-3/4 inches)
  • Protocols
 TCP/IP/HTTP, ARP, FTP, SMTP, ICMP, VISCA RS-232C and SNMP

 

More Sony Camras | More Camera Systems | IP Software | Network Attached Camera systems |
Network Attached Video Storage | Contact us

Return to the Kintronics Home Page. Contact us or Call 1-800-431-1658 or 914-944-3425 to request technical information and our catalog of video products.