| Product
Specifications |
| |
The
flexible External SCSI RAID Subsystem for highly available centralized
data storage |
| Customer
Needs |
| |
Server
systems requiring total redundancy, scalability, and data availability |
| System
Environment |
| |
OS
independent |
| Benefits |
| |
Redundant
and hot swappable components for full data protection |
| Key
Differentiators |
| |
Adaptec
Storage Manager Pro Software Management
Service and Support (1 yr. onsite)
Affordable
Easy-to-use |
| Data
Transfer Rate |
| |
160
MB/sec; 15,000 IOPS |
| Bus
Type |
| |
N/A |
| Package
Contents |
| |
Adaptec DuraStor 6220SS
External RAID Subsystem:
• 1 RAID
controller pre-installed
• 1U RAID appliance
• 2U JBOD Enclosure
• 1 empty canister
• Up to 12 SCSI
drives (select 9 GB, 18 GB, 36 GB or 73 GB drives)
• 4 mounting rails
2 External VHDCI SCSI
cable
Bootable CD containing Adaptec's Storage Manager Pro software, device
drivers, and user manuals (PDF)
Hardware Installation Guide
SMPro User'sGuide
TSID Number
ReadMe First. Registration card, and warranty card |
| Warranty |
| |
3-year
limited warranty that includes 1-year of technical |
| General
Specifications |
| Host
Interface |
| |
Ultra160
SCSI |
| Hot-Swap
and Redundant Components |
| |
RAID
controllers, hard drives, power supplies, cooling fans, and
AC power cords |
| Number
of RAID Controllers |
| |
1
Ultra160 SCSI controller, (upgradable to 2 controllers) |
| SAF-TE
Compliance |
| |
SAF-TE
1.0 Compliant |
| On-Board
CPU |
| |
Pentium
II 333 MHz, 32 KBytes L1 cache, 256 KBytes L2 cache on-chip |
| Host/Device
Data Burst Rate |
| |
Up
to 160MBytes/sec |
| Number
of Host Channels |
| |
One
or two Ultra160 SCSI channel(s) |
| Number
of Device Channels |
| |
Two
or three LVD Ultra160 SCSI device channels |
| Compatible
with LVD SCSI |
| |
Ultra2
SCSI and Ultra160 SCSI protocols |
| Bus
Configurations |
| |
User
selectable single or dual bus |
| Backplane
Design |
| |
Passive
single plane |
| Error
Notification |
| |
SAF-TE
1.0
Audible alarm, status LEDs
SNMP traps, network messaging and remote paging |
| Number
of Drive Bays |
| |
12 |
| Drive
Types |
| |
Low-profile
(1-inch high) SCSI disk drives |
| Drive
Capacity |
| |
18GB,
36GB, and 73GB (7.2 K, 10K and 15K RPM) |
| Maximum
Cap/Enclosure |
| |
876GB
(12 x 73GB) |
| Advanced
RAID Features |
| |
Host
independent active-active failover and failback (November 2001)
Write-back data cache memory bus, 800 MBytes/sec bandwidth
On-line capacity expansion (OCE)
Spare pooling and dedicated spares; array verification
Controller/drive hot-swap supported
Array status monitoring; adjustable stripe size; automatic sector
re-mapping
User-settable priority for array reconstruct, verify, create,
and expand operations
Arrays can be configured for RAID levels 0, 1, 3, 4, 5, 10,
50, JBOD
Up to 24 independent logical arrays per subsystem |
| Advanced
Hardware Features |
| |
128
MBytes expandable to 512 MBytes of PC 133 SDRAM
DIMM, 16 MBytes of ECC-protected SDRAM processor memory
Integrated Nickel Metal Hydride (NiMH) cache battery backup
Flash upgradable firmware, 2 MByte
Stand-alone DuraStor 6200S RAID controller does not include
memory and battery |
| Advanced
SCSI Features |
| |
Ability
to process 70 simultaneous commands
Tagged Command Queuing supported
Reserve/Release (multi-host ready, up to 15 initiators with
single controller)
Up to 15 devices per channel (14 in active-active mode)
Domain validation and cyclical redundancy checking (CRC) data
protection with Ultra160 SCSI drives |
| Electrical
and Mechanical Specifications |
| Input
Voltage |
| |
100-240
VAC (auto-sensing) |
| Input
Current for DuraStor 312R |
| |
3.0
Amperes (maximum) |
| Input
Current for DuraStor 6200SR |
| |
2.0/0.8
Amperes (maximum) |
| Input
Frequency |
| |
50-60
Hz |
| Power
Source |
| |
Dual
independent power supplies |
| DuraStor
6200SR Power Supply Rating |
| |
150
Watts |
| DuraStor
312R Power Supply Rating |
| |
2-350
Watts |
| Power
Source |
| |
Dual
hot-swappable power supplies (power factor correcting) |
| Cooling
Module for DuraStor 6200SR |
| |
Cooling
Module Cooling module with 3 redundant fans |
| Cooling
Fan Module for DuraStor 312R |
| |
Model
# ADA-320FAN |
| Durastor
6200SR Dimensions |
| |
H–1.70
inches W–17.70 inches D–24.50 inches |
| Durastor
312R Dimensions |
| |
H-3.5
inches W-17.65 inches D-23.00 inches |
| Durastor
6200SR Weight |
| |
28
lbs with 2 controllers |
| Durastor
312R Weight |
| |
39
lbs |
| Durastor
312R Power Supply Unit |
| |
Model
# ADA–220PSU |
|
|
