| By
fully integrating high-performance RAID controllers, software, and automatic
environmental monitoring, the ProFibre Storage Array helps reduce your
total cost of ownership. Advanced scalability features provide investment
protection. As your storage requirements grow, you can easily interconnect
ProFibre Storage Arrays to form extremely large storage systems.
The ProFibre
DF1100R is a 10-drive bay, uses 19-inch rack mounting, which increases
flexibility and enables the use of a wide range of industry-standard
disk drives. The ProFibre DF1100R helps ensure reliability by
utilizing fully redundant, hot-swappable active/active controllers,
drives, and power and cooling components. RAID levels 0, 1, 3, 5, and
0+1 and disk drive capacities 9GB, 18GB, 36GB, and 73GB are supported.
You can also leverage host clustering support, which provides a maximum
level of data protection.
|
RAID characteristics |
Model DL1100R |
Model DF1100R |
| Processor
|
Intel**
i960RN |
233
MHz Strong Arm RISC |
| Logical
arrays 3 |
Up
to 40 drives into 8 LUNs |
Up
to 80 drives into 16 LUNs |
| Hardware
XOR |
Yes
|
Yes
|
| Processor
memory with parity protection |
32
MB |
32
MB |
| Data
cache |
64
MB |
64,
128, 256 2, 512 MB
2 |
| Flash
memory |
1 MB
|
2 MB
|
| ECC
memory support |
Yes
|
Yes
|
|
General characteristics |
| Form
factor |
19"
rack mount by 3U high |
| Number
of disk drive bays |
10
|
| Disk
drive capacities |
9, 18,
36, 73 1 GB |
| Maximum
Storage capacity |
730
GB 1 per enclosure |
|
Model DL1100R connectivity (per controller card) and DL1100J
|
| Host
channels |
Two copper FC-AL using HSSDC connectors |
| Drive
channels |
Four
4 Ultra2 SCSI LVD at 80 MB/sec per bus. External connection
via 8 mm 68 pin SCSI LVD connectors. |
| SCSI
bus termination |
Automatic |
| Device
support |
SCSI-1, SCSI-2, Ultra, and Ultra2 SCSI devices |
|
Model DF1100R connectivity (per controller card) and DF1100J
|
| Host
channels |
One copper FC-AL supporting two target IDs using a single HSSDC
connector |
| Drive
channels |
Two fibre at 100 MB/sec per channel. External connection via HSSDC
connector. |
|
Operating/power specifications |
| Temperature
|
10 to 40° C; 8% to 80% non-condensing humidity |
| Max
wet bulb |
27° C |
| AC
power per single enclosure |
90 to 260 VAC (47 to 63 Hz line frequency), 415 W at max avg |
| Certification
|
FCC Class A, CSA950/UL1950, EN60950, IEC60950 |
|
Dimensions |
| Rack-mounted
unit |
126 mm H x 444 mm W x 546 mm D(5.0 in H x 17.5 in W x 21.5 in D)
|
| Deskside
unit |
529 mm H x 281 mm W x 594 mm D(20.8 in H x 11.1 in W x 23.4 in D)
|
|
Host attachment support |
| QLogic
HBAs; Vixel hubs |
|
Operating systems support |
Windows
NT/E 4 with Service Pack 6 or higher
and Windows 2000 (DF1100R only) |
1 73 GB fibre drives only
2 DF1100R only
3 With drive expansion enclosures
4 Two drive channels for DL1100J
|
More
Raid | Adaptec |
IBM DF4000R |IBM
DF1100 | NAS
|
Product
Highlights
- Powerful
233MHz RISC processor
- System
scalability up to 80 drives and up to 5.8TB per system
- Two
fibre drive channels at 100MB/s per channel
- One
copper FC-AL host channel with 1Gb/s host data rate
- Transparent
failover/failback for clustered operating systems to help maximize
data protection
- Mirrored
data cache up to 512MB
- Helps
ensure high availability by using redundant, hot-swappable components
- Uses
advanced enclosure technology to minimize vibration and maximize drive
performance
- Supports
transparent failover for clustered operating systems to help maximize
data protection
- Scales
from 9 GB to 5.8 1 TB per system (DF1100R)
- Simplifies
interconnectivity to enable very large storage capacities
Integrates RAID controllers to manage site-wide or enterprise Windows-based
solutions
|
