 |
VS2402 is a high performance video server for professional IP surveillance application. It transmits up to four analog video streams over Ethernet or modem and provides additional video outputs for the connection of analog monitors or traditional multiplexers. The VS2402 is based on M-JPEG technology that is ideal for converting your old analog CCTV to the latest network connected surveillance system. |
- TCP/IP network remote
video surveillance system
- High performance and
fully configurable MJPEG compression engine
- Built-in web server
- In-image motion detection
- PPP dial-in and dial-out
via external modem
- Adjustable network bandwidth
- Remote PTZ camera control
- Flexible integration
interface
- 4 analog camera inputs,
4 analog video outputs
- Video stream- 30/25 frames/sec
for single input, 6 frames/sec for Quad
- Successful applications
from application development partners
|
Networking Protocol |
TCP/IP, HTTP, SMTP, FTP, Telnet, NTP, DNS and DHCP |
|
Modem |
PPP(dial-up, direct cable connection) |
|
Network |
10baseT Ethernet or 100baseT Fast Ethernet |
| Video Compression Supported | MJPEG |
| Features |
Adjustable image
size and quality |
|
Resolution NTSC |
Up to 30 frames at
176x112 Up to 30 frames at 352X240 Up to 8 frames at 704X576 |
| General I/O | 1 opto-isolated sensor
input (max. 12VDC 50mA) 1 output relays (max. 24VDC 1A, 125VAC 0.5A) |
|
Alarm Features |
Motion detection
with percentage and sensitivity |
|
Com1 and Com2 ports |
2 RS232/RS4859 ports: pin D-SUB RS232 or RS485 max.115.2Kbps |
|
Multiple PTZ cameras |
PT positioning device
control through RS232 or RS485 Clear-data command driver is supported |
|
Security |
Administrator and
user group protected 15 digits password protection Demo account with limitation by administrator |
|
Remote Software Upgrade |
System firmware upgradeable via FTP |
|
Power |
12V DC, 1.2A external power supply |
|
Temperature |
0-65°C (32 - 149°F) |
| Browser | Internet Explorer
4.x or above, Netscape Navigator 4.x or above |
Return to the